- TR Products»
- Nuts»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsWashersSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- Hexagon 80 UNC
Bumax Hexagon Nut 80 UNC
A4-SS 2343-316L HiMo
SS 1989, (ANSI B18.2)
Please note: Not all sizes stated are available from stock, please enquire for availability.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information
Please note: These products are only available for distribution to the European market
|Thread d||No. of threads per inch||s inch (es)||s mm||m mm||Strength classification||Approx. Weight kg/100|
Bumax 88-U6M 1/4 UNC Since no particular requirement has been specified regarding the shape of the nut. the designation U6M has been given. U6M means that any design of U6FM. U6AM or U6PM is approved by the purchaser.
Bulten Stainless normally supplies 1 design in accordance with U6FM unless otherwise specified. Supplied anti-friction conditioned.
|No. per pack||100||100||50||50||50||25||25||10||10|