- TR Products»
- Screws»TR Plastic ProductsSpacers & PillarsSets, Bolts & StuddingSocket ProductsNutsWashersSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- Self Drilling Screws»
- Countersunk Head Cross Recess (H) Form P
Countersunk Head Self-Drilling screws – Cross Recess (H) – Form P
Steel, Zinc & clear - other finishes often available
A2 Stainless steel, Self colour
Please note: Not all sizes stated are available from stock, please enquire for availability.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information
|Thread (d) mm||2.9||3.5||3.9||4.2||4.8||5.5||6.3|
|Head H max (DIN)||1.7||2.1||2.3||2.5||3||3.4||3.8|
NB: Generally our preferred stock is to DIN - if dimensions are critical to your application you should check with us prior to ordering.
Please make a selection from the criteria above