Overview

Fin-Sert - Unheaded

Material:  

Brass

Other materials available to order  

For use in:  

Thermoplastics  

Installation:  

Cold
 

Please click here to download a PDF of this product information

Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.

Dimension data
 Dimensional Data     
Thread sizeL mmK mmN mmB mmC mmRecommended Hole Size mm (-0.0/+0.1)Minimum Wall Thickness mm
MetricUnified
M2*2*4.03.73.10.454.83.21.6
M2.5*-4.84.53.90.585.54.02.0
M34*4.84.53.90.585.54.02.0
M3.56*6.45.34.70.746.44.82.4
M48*7.96.15.50.897.15.62.8
M510*9.57.06.31.077.96.43.2
M6¼”*12.78.67.91.329.58.04.0
M8*5/16”*12.710.29.51.3211.19.64.8

* Non-preferred – please enquire for availability

Further information

Fin-Sert Information for designers

The Fin-Sert is a press-in insert, designed for post mould installation into thermoplastics. The combination of fins and knurls provides good levels of pull out and torque resistance.

Advantages:

Simple, press-in installation

Free running female thread

Good pull out and torque resistance

Installation Data

The Fin-Sert should be installed with a press that can provide a steady squeezing action to prevent damage to the mating boss.

Preferred range
Preferred Range
Thread (d)
M3M3.5M4M5M6
BRBRBRBRBR

BR - Brass, Self Colour

Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
Part numberFinishLengthThreadMaterialHead

Please make a selection from the criteria above