- TR Products»
- Sheet Metal Fasteners»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsNutsWashersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- TR Self-Clinch Studs»
- Studs for Stainless Steel
TR Hank® Self-Clinch Studs for stainless steel - Metric
Materials and Finishes:
TR-FH4: 400 series Stainless steel/Self colour
Please note: part numbers generated on the website may also include special manufactured parts and be subject to minimum order quantities, please call for more details.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
|Technical Support Articles|
|TR Self-Clinch Through Standoffs for Hard Stainless Tooling|
|Rec sheet thickness||1||1 - 2.4||1 - 2.4||1 to 2.4||1.6 to 2.4||2.4|
|Hole +0.08 -0.0||2.5||3.0||4.0||5.0||6.0||8.0|
|Min distance to edge of sheet||5.4||5.6||7.2||7.2||7.9||9.6|
|Test sheet Data||1.5 St/St||1.5 St/St||1.5 St/St||1.5 St/St||2.5 St/St|
|Pull Through (N)||3300||8010||10020||14950|