- TR Products»
- Sheet Metal Fasteners»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsNutsWashersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- TR Self-Clinch Studs»
TR Hank® Self-Clinch Pins - Metric
Materials and Finishes:
TR-TP: Steel/Zinc & Clear
TR-TPS: Stainless Steel/Self Finish
Other finishes available on request. A4 on request only
Self Clinch Pins are primarily bar turned.
Please note: part numbers generated on the website may also include special manufactured parts and be subject to minimum order quantities, please call for more details.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
|Technical Support Articles|
|TR Self-Clinch Pin Tooling|
|METRIC||Pin Diameter +/- 0.05||Min. Sheet Thickness||Hole size in Sheet + 0.08||D +/- 0.4||H Max.||Min. Distance hole C/L to edge|
|Pin dia Code||3mm||4mm||5mm||6mm|
|Test sheet material||Steel||Steel||Steel||Steel|
Please make a selection from the criteria above