Overview

Nylon insert nuts - Type P - Full - Metric

DIN 982/DIN 6924

Materials and Finishes:

Steel/Zinc & clear 

Stainless steel/Self colour

Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.

Dimension data
dM4 (1)M5M6M8M10M12M14M16M20 (1)
m2.94.44.96.448.0410.3712.114.116.9
7810131719222427
h66.389.511.514161822
e approx.7.78.811.114.419.021.124.526.833.0

1 - Non-preferred. Please enquire for availability 

2 - To DIN 6924

Technical Support Articles
Thread Geometry - Metric Coarse Threads
Tightening Factors & Tolerances
Torque data - Steel fasteners - Standard metric threads
Mechanical properties - Metric steel nuts
Preferred range
Preferred Range
Thread
M5M6M8M10M12M14M16M20
STSTSTSTSTSTSTST
 

ST - Steel, Self colour / Zinc & Clear

Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
Part numberFinish-MaterialThread

Please make a selection from the criteria above