- TR Products»
- TR Security Fasteners»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsNutsWashersSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- Countersunk Head Machine Screws»
- Mono-Drive 9 Countersunk Head
Mono-Drive 9 - Security Machine Screws – Countersunk Head
This range is not available from stock but to order only (minimum order quantities will apply)
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
Similar to TR Security Machine Screw 2 but with a four hole drive system providing a highly visible deterrent. Removable by dedicated driver only. Suitable for surface or recessed applications.
TR Security Drivers
Our range of drivers and drive bits are available from stock but only to bona fide purchasers of TR Security fasteners and can only be purchased separately if fasteners have been previously been supplied.
Please note: Most security screws are not manufactured to DIN or ISO standards and head dimensions can vary considerably from manufacturer to manufacturer. If head dimensions are critical, please specify at time of order.