Overview

Mono-Drive 12 - Kinmar®  Bolt - Permanent & Removable

Materials & Finishes

Steel, Zinc & Clear Plated

Steel, Galvanised (available on request)

A2 Stainless Steel, Self Colour


Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.

Dimension data
PERMANENT
 M5M6M8M10M12
A12.112.116.120.124.2
B5.65.67.39.210.6

 

REMOVABLE
 M5M6M8M10M12
A12.112.116.120.124.2
B5.85.87.39.210.6

 

Further information

Key Features

Kinmar® Permanent & Removable Bolt heads have the same dimensions as the Kinmar® nuts.

TR Security Drivers

Requires matching driver socket

Please note: Most security screws are not manufactured to DIN or ISO standards and head dimensions can vary considerably from manufacturer to manufacturer. If head dimensions are critical, please specify at time of order.

Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
Part numberTypeFinishMaterialThread

Please make a selection from the criteria above