- TR Products»
- TR Security Fasteners»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsNutsWashersSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- Pan Head Self Tappers»
- Mono-Drive 7 Button Head
Mono-Drive 7 - Hex Pin Security Self Tapping Screw – Button Head
Materials & Finishes
A2 Stainless Steel, Self Colour
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
No. 6 3.5mm | No. 8 4.2mm | No. 10 4.8mm | No. 12 5.5mm | No. 14 6.3mm | |
D nom (mm) | 6.7 | 7.4 | 9.3 | 10.3 | 11.0 |
M max (mm) | 2.5 | 2.1 | 2.6 | 3.2 | 3.4 |
Key Features
A high quality screw with a traditional hexagon socket drive system but with a centrally located cold forged security pin. Removable by dedicated driver only. Recommended for high strength applications. Ideal for surface or recessed applications and for power driver automated assembly.
TR Security Drivers
Our range of drivers and drive bits are available from stock but only to bona fide purchasers of TR Security fasteners and can only be purchased separately if fasteners have been previously been supplied.
Please note: Most security screws are not manufactured to DIN or ISO standards and head dimensions can vary considerably from manufacturer to manufacturer. If head dimensions are critical, please specify at time of order.