Unified Flange Nuts - Unserrated

ANSI / ASME B18.21.1 1972 (R1983)

Materials and Finishes:

Steel/Zinc & clear 

Stainless steel/Self colour 

Brass/Self colour

Please note: Not all sizes stated are available from stock, please enquire for availability.

Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.

Dimension data
d (thread size) UNF 6.40UNF 8.36UNF 10.321/4 UNF5/16 UNF3/8 UNF7/16 UNF1/2 UNF9/16 UNF5/8 UNF3/4 UNF
UNC 6.32UNC 8.32UNC 10.241/4 UNC5/16 UNC3/8 UNC7/16 UNC1/2 UNC9/16 UNC5/8 UNC3/4 UNC
m max0.1710.2030.2190.2360.2830.3470.3950.4580.5060.5690.675
s max0.3120.3440.3750.4380.5000.5620.6880.7500.8750.9381.125
F max0.4220.4690.5000.5940.6800.7500.9371.0311.1881.2811.500


Technical Support Articles
UNC thread sizes
UNF thread sizes
Tightening factors & tolerances
Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
Part numberFinish-MaterialThread

Please make a selection from the criteria above