- TR Products»
- Washers»TR Plastic ProductsSpacers & PillarsScrewsSets, Bolts & StuddingSocket ProductsNutsSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6Bonded Seals, O-Rings & CirclipsFasteners to Japanese StandardsSpring Steel FastenersManufacturing ConsumablesSpecial ManufactureProduct Literature
- Locking for Unified Screws»
- Spring - Square Section
Unified spring washers - Square section
Materials and Finishes:
Steel/Zinc & clear
Stainless steel/Self colour
Please note: Not all sizes stated are available from stock, please enquire for availability.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
|To suit d (thread size)||7/8 UNF||5/32 UNF||3/16 UNF||1/4 UNF||5/16 UNF||3/8 UNF||7/16 UNF||1/2 UNF||9/16 UNF||5/8 UNF||3/4 UNF|
|7/8 UNC||5/32 UNC||3/16 UNC||1/4 UNC||5/16 UNC||3/8 UNC||7/16 UNC||1/2 UNC||9/16 UNC||5/8 UNC||3/4 UNC|
|Part number||Finish||-||Material||To suit|
Please make a selection from the criteria above